ASG LiPo Battery 11.1V 1300mAh Crane X3

Presentation:

This ASG battery is a LiPo type and is composed of 3 cells forming a crane X3 assembly. It has a voltage of 11.1V and a capacity of 1300mAh. The battery technology allows for very compact dimensions of the entire assembly, thus enabling installation in very tight battery compartments. The 25C discharge rate allows for optimal current supply for the replica's power needs.

The battery's insulation is well-made, and the wires and connectors are of high quality. This battery is equipped with a Tamiya Mini connector.

WARNING:

• Lithium Polymer (LiPo) batteries can be extremely dangerous.
• The user must ensure all safety precautions for: potential fire, bodily harm, and property damage.
• In case of improper use, damage, or manufacturing defects, LiPo batteries can cause explosions, fire, smoke, and poisoning risks.
• By purchasing this type of battery, the user assumes responsibility for any risks associated with LiPo batteries.
• LiPo batteries are not toys and should not be left within reach of children as they can pose a real health hazard.
• LiPo batteries must not be thrown into fire, placed in an oven or microwave as they can explode.
• LiPo batteries contain/may emit electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries carefully and avoid any contact with skin, eyes, or other body parts. In case of contact, rinse thoroughly with water and contact a doctor immediately.
• Do not attempt to charge mechanically or chemically damaged batteries.

Actions that lead to battery damage:

• Charging LiPo batteries with a charger without balancing and without automatic shut-off.
• Connecting in series or parallel with another cell or battery even if they appear similar.
• Exceeding the maximum and minimum operating voltages.
• A drop or rise in temperature outside the permitted limits.
• Excessive charging current.
• Short-circuiting the battery terminals.
• Subjecting the battery to mechanical shocks such as dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
• Contact with liquids.
• Improvising an improper charging setup.
• Using inappropriate, improvised charging cables.

General information:

• LiPo batteries consist of cells.
• The parameters of this type of battery are: Voltage measured in Volts (V), Capacity measured in milliamp hours (mAh), and instantaneous discharge (C).
• Each LiPo battery has a power connector and a charging connector.
• The power connector is used to power the device.
• The charging connector is exclusively for charging the battery. (in some cases, charging is done through both the power and charging connectors).
• The battery is charged using the charging connector, and for some advanced chargers, connecting the power connector is also necessary.
• LiPo batteries are charged with special chargers that have balancing functions for the voltage of each cell and automatic shut-off.
• Each LiPo battery has a maximum charge rate of 1.05X of the battery capacity, which must not be exceeded during charging.
• Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
• During operation or charging, the battery temperature must not drop below 0°C or rise above 50°C.
• For long-term storage, the battery capacity should be between 15 and 25% of the maximum value.

Airsoft6 cannot guarantee that you have used correct operating methods and have adhered to the conditions for charging, discharging, or storing LiPo batteries. For this reason, we reserve the right to refuse the replacement, as a warranty, of improperly used batteries (which violate the instructions and warnings above) and are not responsible for material damages, moral losses, or loss of human life.