Specna Arms LiPo 11.1V 1300mAh crane battery x3 Deans

Presentation

This Specna Arms battery is a LiPo type and consists of 3 cells that make up an X3 crane assembly. It has a voltage of 11.1V and a capacity of 1300mAh. The battery technology allows for very compact dimensions of the entire assembly, making it suitable for installation in tight spaces. 

The battery insulations are well made and the cables and connectors are of high quality. This battery is equipped with a Small Tamiya plug.

ATTENTION:

• Lithium-ion Polymer (LiPo) batteries can be extremely dangerous.
• Users must take all precautionary measures for potential fire, bodily harm, and damage to property.
• If used improperly, damaged or due to manufacturing defects, LiPo batteries can cause explosions, fire, smoke, and risk of poisoning.
• By purchasing this type of battery, the user assumes responsibility for any risks associated with LiPo batteries.
• LiPo batteries are not toys and should not be left within reach of children as they can pose a real danger to their health.
• LiPo batteries should not be thrown into fire, placed in an oven, or microwave as they can explode.
• LiPo batteries contain/may emit electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries with care and avoid any contact with the skin, eyes, or other parts of the body. In case of contact, rinse thoroughly with water and seek medical attention immediately.
• Do not attempt to charge mechanically or chemically damaged batteries.

Actions that lead to battery damage

• Charging LiPo batteries with an unbalanced charger and without automatic charge termination.
• Connecting in series or parallel a cell or another battery even if they appear similar.
• Exceeding maximum and minimum operating voltages.
• A decrease or increase in temperature beyond permitted limits.
• Too high charging current.
• Short-circuiting the battery poles.
• Exposing the battery to mechanical shocks such as dropping, hitting, bending, cutting, twisting, deforming, or drilling.
• Contact with liquids.
• Improvise an inappropriate charging installation.
• Using improper, improvised charging cables.

General Information

• LiPo batteries are made up of cells.
• The parameters of this type of batteries are: Voltage measured in Volts (V), Capacity measured in milliampere-hours (mAh), and instant discharge (C).
• Each LiPo battery has a power plug and a charging plug connected.
• The power plug is used to power the device that requires power.
• The charging plug is exclusively used for charging the battery. (in some cases, charging is done both through the power plug and the charging plug)
• The battery is charged using the charging plug, and in some advanced chargers, it is necessary to connect the power plug as well.
• LiPo batteries are charged with special chargers for LiPo batteries that have the function of balancing the voltage of each cell and automatically stopping the charging process.
• Each LiPo battery has a maximum charging rate of 1.05X of the battery's capacity, which should not be exceeded during charging.
• Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
• During use or charging, the battery temperature should not drop below 0°C or rise above 50°C.
• For long-term battery storage, the battery capacity should be somewhere between 15 and 25% of the maximum value.

NRG cannot guarantee that correct methods of operation have been used and that the charging, discharging, or storage conditions of LiPo batteries have been respected. For this reason, we reserve the right to refuse warranty replacement of incorrectly used batteries (that violate the instructions and warnings above) and we are not responsible for material or moral damages or loss of human lives.