Frequently Asked Questions
The A2A 11.1V and 1200mAh crane battery is the perfect choice for a well-tuned replica. The cells are individually isolated, allowing for a flexible battery shape. The cells can be arranged in various configurations to fit into tight battery compartments.
Equipment Specifications
| Battery Connector | Small Tamiya |
| Magazine Capacity | 1200 mAh |
| Voltage | 11.1 V |
| Battery Shape | Crane |
| Discharge | 25 C |
| Battery Type | Li-Po |
| Width | 31 mm x3 |
| Height | 8 mm x3 |
| Length | 68 mm x3 |
Product Description
Presentation
A2A, or in full Addicted to Airsoft, is a newly established Chinese company in the airsoft field that produces quality components at affordable prices. Due to its recent emergence, it is not yet well-known among airsoft players, but this will change with the introduction of its products.
Description
This LiPo battery consists of 3 separate cells connected by electrical wires. The small capacity of the battery allows for a compact overall size. The battery has a capacity of 1200mAh, and the voltage is 11.1 volts, with an instantaneous discharge rate of 25C. Therefore, it is recommended to use this battery only in replicas optimized to operate with such high voltages. Once installed in the replica, it is possible that the internals may suffer from any mechanical shock caused by the battery.
The battery's insulation is well-made, and the connector wires are low-resistance quality wires.
Packaging
The batteries are individually packaged in protective foil against mechanical shocks.
WARNING:
- Lithium-ion Polymer (LiPo) batteries can be extremely dangerous.
- The user must take all precautions against: potential fire, bodily harm, and property damage.
- In case of improper use, damage, or manufacturing defects, LiPo batteries can cause explosions, fire, smoke, and poisoning risks.
- By purchasing this type of battery, the user assumes responsibility for any risks associated with LiPo batteries.
- LiPo batteries are not toys and should not be left within reach of children as they can pose a real health hazard.
- LiPo batteries should not be thrown into fire, placed in an oven, or microwave as they may explode.
- LiPo batteries contain/may emit electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries carefully and avoid any contact with skin, eyes, or other body parts. In case of contact, rinse thoroughly with water and contact a doctor immediately.
- Do not attempt to charge mechanically or chemically damaged batteries.
Actions Leading to Battery Damage
- Charging LiPo batteries with a charger that lacks balancing and automatic shut-off features.
- Connecting in series or parallel with another cell or battery even if they appear similar.
- Exceeding the maximum and minimum operating voltages.
- A temperature drop or rise outside the allowed limits.
- Charging current that is too high.
- Short-circuiting the battery terminals.
- Subjecting the battery to mechanical shocks such as dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
- Contact with liquids.
- Improvising an improper charging setup.
- Using inappropriate or improvised charging cables.
General Information
- LiPo batteries consist of cells.
- The parameters of this type of battery are: Voltage measured in Volts (V), Capacity measured in milliamp-hours (mAh), and instantaneous discharge (C)
- Each LiPo battery has a power connector and a charging connector.
- The power connector is used to power the device intended for power supply.
- The charging connector is exclusively for charging the battery. (in some cases, charging is done through both the power and charging connectors)
- The battery is charged using the charging connector, and for some advanced chargers, connecting the power connector is also necessary.
- LiPo batteries are charged with special chargers designed for LiPo batteries that have the function of balancing the voltage of each cell and automatic shut-off of the charging process.
- Each LiPo battery has a maximum charging rate of 1.05X its capacity, which must not be exceeded during charging.
- Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
- During operation or charging, the battery temperature must not drop below 0°C or exceed 50°C.
- For long-term storage of the battery, the battery capacity should be between 15 and 25% of the maximum value.
Airsoft6 cannot guarantee that you have used correct operating methods and have adhered to the conditions for charging, discharging, or storing LiPo batteries. For this reason, we reserve the right to refuse replacement, as a warranty, for improperly used batteries (which violate the instructions and warnings above) and are not responsible for material, moral damages, or loss of human life.