G&P M4 URX 3

Presentation

Over the years, the classic M4A1 has undergone and will continue to undergo modifications and improvements in line with the latest technological manufacturing requirements and possibilities. The enhanced design offers better maneuverability and functionality, while the materials used are lighter yet more durable than ever. All of this aims to optimize the user's effort, thereby improving overall performance.

Exterior of the replica

An exceptional airsoft replica manufactured by G&P to provide airsoft players with a platform that can be used as a DMR, Designated Marksman Rifle. The length of the replica suggests this aspect. With a length of 970 mm, it can be said that this is not a short airsoft replica. Maneuvering it in tight spaces could be quite challenging. This toy is recommended for open areas. The quality of the materials, construction, and finishes is impressive. At the front, there is a standard rail system covered with plastic ornaments for enhanced comfort. The classic M4 body is made of aluminum and magnesium alloy, achieving a low weight but very good durability. The outer barrel of the replica is noteworthy, due to the design that typically allows the real weapon to sustain fire for a longer period. In this case, it is purely decorative but looks superb. The grip and stock of the airsoft replica are made from high-quality ABS plastic, very durable. Both have sections covered with a highly textured surface designed to improve maneuverability. The stock of the airsoft replica is crane-type and adjustable in length. Along almost the entire length of the upper part, there is a standard rail where optical accessories and more can be mounted. The airsoft replica is also equipped with a classic, foldable sighting system. You never know when you might need it.

To support the airsoft replica, we can use QD attachments located on the sides of the front rail system, above the grip, and on the stock of the airsoft replica. A QD ring is included in the package.

Interior of the replica

The heart of the airsoft replica is a version 2 gearbox equipped with 8 mm steel bearings of high quality. The interior of the gearbox is very carefully processed; the gears are made from a hard and wear-resistant metal, and the shimming is very well done. The cylinder head is made of aluminum, as is the nozzle, which is also equipped with a sealing o-ring. The cylinder is specifically ported by G&P, meaning it is bored out towards the opposite end of the exhaust. The BBs are propelled at a speed of approximately 115-120 m/s measured with 0.20g BBs.

The motor is a high-speed model, G&P M120, which, together with a 9.6V 2000 mAh battery, can shoot up to 21-22 BBs per second.

The hop-up chamber is metal, and the inner barrel has a diameter of 6.08 mm. The accuracy of the airsoft replica is good, and the hop-up effect is consistent.

Power Supply

The airsoft replica is equipped with a large Deans connector, and it supports 7.4V LiPo or 8.4V and 9.6V NiMh batteries. It is recommended to use a LiPo battery with a voltage of 7.4V 1000-1200 mAh stick type, to allow its installation inside the buffer tube, or a 9.6V 1600 mAh crane battery, which can be mounted on the sides of the stock with a little attention. It is not recommended to use a battery larger than 9.6V as it may damage the airsoft replica.