Electro River LiPo Battery 11.1V 2000mAh Crane X3

Overview

This Electro River battery is a LiPo type and consists of 3 cells forming a Crane X3 assembly. It has a voltage of 11.1V and a capacity of 2000mAh. The battery technology allows for very compact dimensions, making it suitable for installation in tight battery compartments. The 25C/50C discharge rate provides optimal current supply for the replica's power needs.

The battery's insulation is well-made, and the wires and connectors are of high quality. This battery is equipped with a Tamiya Mini connector.

WARNING:

• Lithium Polymer (LiPo) batteries can be extremely dangerous.
• The user must take all precautions against: potential fire, bodily harm, and property damage.
• If improperly used, damaged, or defective, LiPo batteries can cause explosions, fire, smoke, and poisoning risks.
• By purchasing this type of battery, the user assumes responsibility for any risks associated with LiPo batteries.
• LiPo batteries are not toys and should not be left within reach of children as they can pose a real danger to their health.
• LiPo batteries must not be thrown into fire, placed in an oven or microwave as they may explode.
• LiPo batteries contain/may emit electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries carefully and avoid any contact with skin, eyes, or other body parts. In case of contact, rinse thoroughly with water and seek medical attention immediately.
• Do not attempt to charge mechanically or chemically damaged batteries.

Actions Leading to Battery Damage

• Charging LiPo batteries with a charger that lacks balancing and automatic shut-off features.
• Connecting in series or parallel with another cell or battery even if they appear similar.
• Exceeding the maximum and minimum operating voltages.
• A temperature drop or rise outside the allowed limits.
• Excessive charging current.
• Short-circuiting the battery terminals.
• Subjecting the battery to mechanical shocks such as dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
• Contact with liquids.
• Improvising an improper charging setup.
• Using inappropriate, improvised charging cables.

General Information

• LiPo batteries are made up of cells.
• The parameters of this type of battery are: Voltage measured in Volts (V), Capacity measured in milliamp hours (mAh), and instantaneous discharge (C)
• Each LiPo battery has a power connector and a charging connector.
• The power connector is used to power the device intended for supply.
• The charging connector is exclusively for charging the battery. (in some cases, charging is done through both the power and charging connectors)
• Charging the battery is done using the charging connector, and for some advanced chargers, connecting the power connector is also required.
• LiPo batteries are charged with special LiPo battery chargers that have balancing functions for the voltage of each cell and automatic shut-off of charging.
• Each LiPo battery has a maximum charging rate of 1.05X its capacity, which must not be exceeded during charging.
• Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
• During operation or charging, the battery temperature must not drop below 0°C or rise above 50°C.
• For long-term storage of the battery, its capacity should be between 15 and 25% of its maximum value.

Airsoft6 cannot guarantee that you have used correct operating methods and have adhered to the conditions for charging, discharging, or storing LiPo batteries. For this reason, we reserve the right to refuse replacement, as a warranty, for improperly used batteries (which violate the above instructions and warnings) and are not responsible for material damages, moral losses, or loss of human life.