Frequently Asked Questions
LiPo stick-shaped battery composed of 2 cells resulting in 7.4V with a capacity of 1300 mAh. The battery discharge rate is approximately 25C, providing the necessary current for most replicas.
Equipment Specifications
| Battery Connector | Small Tamiya |
| Magazine Capacity | 1300 mAh |
| Voltage | 7.4 V |
| Battery Shape | Stick |
| Discharge | 25 C |
| Battery Type | Li-Po |
| Width | 20 mm |
| Height | 10 mm |
| Length | 135 mm |
Product Description
LiPo battery made of 2 connected cells, stick shape. The battery technology allows for very compact dimensions, making it possible to install in very tight battery compartments. The 25C discharge rate provides sufficient current for the needs of the replica.
The battery's insulation is well-made, and the wires and connectors are of high quality.
WARNING:
- Lithium Polymer (LiPo) batteries can be extremely dangerous.
- The user must take all precautions against: potential fire, bodily injury, and property damage.
- In case of improper use, damage, or manufacturing defects, LiPo batteries can cause explosions, fire, smoke, and poisoning risks.
- By purchasing this type of battery, the user assumes responsibility for any risks associated with LiPo batteries.
- LiPo batteries are not toys and should not be left within reach of children as they can pose a real danger to their health.
- LiPo batteries must not be thrown into fire, placed in an oven, or microwave as they may explode.
- LiPo batteries contain/can emit electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries with care and avoid any contact with skin, eyes, or other body parts. In case of contact, rinse thoroughly with water and contact a doctor immediately.
- Do not attempt to charge mechanically or chemically damaged batteries.
Actions Leading to Battery Damage
- Charging LiPo batteries with a charger that lacks balancing and automatic shut-off features.
- Connecting in series or parallel with another cell or battery even if they appear similar.
- Exceeding the maximum and minimum operating voltages.
- A temperature drop or increase outside the allowed limits.
- Excessive charging current.
- Short-circuiting the battery terminals.
- Subjecting the battery to mechanical shocks such as: dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
- Contact with liquids.
- Improvising an improper charging setup.
- Using inappropriate, improvised charging cables.
General Information
- LiPo batteries consist of cells.
- The parameters of this type of battery are: Voltage measured in Volts (V), Capacity measured in milliamp hours (mAh), and instantaneous discharge (C)
- Each LiPo battery has a power connector and a charging connector.
- The power connector is used to power the device intended for powering.
- The charging connector is exclusively for charging the battery. (in some cases, charging is done through both the power and charging connectors)
- The battery is charged using the charging connector, and for some advanced chargers, connecting the power connector is also necessary.
- LiPo batteries are charged with special LiPo chargers that have the function of balancing the voltage of each cell and automatic shut-off of charging.
- Each LiPo battery has a maximum charging rate of 1.05X its capacity, which must not be exceeded during charging.
- Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
- During operation or charging, the battery temperature must not drop below 0°C or exceed 50°C.
- For long-term storage of the battery, the capacity should be between 15 and 25% of the maximum value.
Airsoft6 cannot guarantee that you have used correct operating methods and have adhered to the conditions for charging, discharging, or storing LiPo batteries. For this reason, we reserve the right to refuse replacement under warranty for improperly used batteries (which violate the above instructions and warnings) and are not responsible for material, moral damages, or loss of life.