KJW SIG P226R KP-01

Brief History:

Created to replace the well-known 1911, it was presented to the decision-making committee in 1984 and ranked second in preference. Due to financial reasons, its adoption was delayed for a few years until the Navy SEALs requested its introduction into service. A solid pistol built for intense use on the battlefield. A useful feature is the ability to disarm the pistol without the risk of accidental discharge by using the special disarm lever.

Exterior of the Replica:

Manufactured by KJW SIG P226 R, it accurately replicates the real pistol. It is made almost entirely of quality metal, respecting the functions of the real weapon. One example is the disarm function of the hammer. If the airsoft replica is cocked but you no longer wish to fire, you can use your thumb to activate the disarm button, bringing the airsoft replica to a safe state. The pistol is of the Double Action type, meaning that when the trigger is pulled, the hammer of the replica is cocked and then released, triggering the firing mechanism. The pistol weighs 930g, which is 34g lighter than the real pistol, thus adding a touch of realism to the airsoft replica.

Internals of the Replica:

The airsoft replica features a HopUp system that is adjustable; to access the adjustment, the slide must be removed, with the adjustment located under the HopUp chamber. The HopUp is of high quality, providing the BB with a straight trajectory. The firing mechanisms of the pistol are standard T.M., allowing for upgrade possibilities. The magazine can hold 26 BBs. It is recommended to use 0.20g BBs for optimal performance. The airsoft replica has a velocity of 80-85 meters per second with 0.20g BBs.

Power Supply:

The airsoft replica operates on Green Gas; any weaker or stronger gas may damage the internal mechanisms. For optimal performance, the airsoft replica should be used in normal atmospheric conditions at temperatures above 15°C. With a gas fill, the airsoft replica operates the entire magazine and, at the end, locks the slide in the position indicating the end of BBs.

Periodically, the airsoft replica should be cleaned and lubricated according to the recommendations in the Service and Care section. This way, the airsoft replica can function correctly for a long time.