KJW KP-06

An exceptional airsoft replica based on the 2011 platform, which in turn originates from the classic 1911. This platform, unlike the previous model, features a magazine with increased capacity by arranging the cartridges in a zig-zag pattern, reducing the caliber while increasing the grip and frame dimensions. The presented model closely resembles the pistol manufactured by STI, namely the STI Perfect 10. An imposing pistol that does not go unnoticed.

Exterior of the Replica

This manufactured toy is produced by KJW largely from metal. Due to the Hi-Capa platform, the grip is made from quality ABS plastic. This contributes to reducing weight, and in case of damage, this component can be easily replaced. The finishes of the airsoft replica are very good, with the outer barrel being chrome-plated and the paint applied to the other components being very durable. The rear sight is adjustable, and the use of luminescent tubes facilitates aiming in low light conditions. This toy replicates the safety features specific to the 2011, namely; the safety behind the grip, which does not allow the hammer to be activated without a firm grip on the pistol, and the hammer safety in the cocked position, which is ambidextrous.

Interior of the Replica

Since this airsoft replica is based on the Hi-Capa platform, the internals are compatible with this series, greatly expanding the possibilities for upgrades and replacements if necessary. The Hop-Up is adjustable from inside the toy. Thus, to adjust it, the slide must be removed. Once adjusted, this Hop-Up remains constant and does not change position during use. The airsoft replica has a speed of approximately 110 meters per second measured with 0.20g BBs. It is recommended to use 0.25g BBs for optimal performance.

Power Source

This airsoft replica operates correctly using Green Gas. In normal atmospheric conditions at temperatures above 15°C, with a gas charge, the toy can fire all the BBs in the magazine, and when they are exhausted, the slide is locked in the warning position indicating the end of the BBs.

A significant advantage of the airsoft replica is the ability to use CO2-based magazines; the manufacturers KJW designed the latest versions of this replica to allow the use of both gas and CO2 without additional pressure on the firing system. The speed will increase when using CO2, so be cautious of the game regulations to avoid exceeding the safety speed.

Periodically, the airsoft replica must be cleaned and lubricated according to the recommendations in the Service and Maintenance section. This way, the airsoft replica can function correctly for a long time.