Frequently Asked Questions
G&P Troy M7A1
Product code: A6816
M4 CQB manufactured by G&P designed for Close Quarters battles. The reduced dimensions and lightweight construction using aluminum significantly enhance maneuverability. The front RIS allows for the attachment of a wide variety of accessories.
The use of a High-Speed motor enables the emptying of a 120bb mid-cap magazine in less than 6 seconds. The resulting hail of BBs, when used correctly, can take out many opponents on the opposing team.
Equipment Specifications
| Gearbox Version | Version 2 |
| Firing Mode | Semi/Auto |
| Hop Up | Adjustable |
| Battery Connector | Large Deans |
| Speed | 100 - 105 m/s |
| Recommended Battery | 7.4 V Li-Po 1200mAh |
| Inner Barrel Diameter | 6.08 mm |
| Material | Aluminum, Steel, Metal, Aluminum, ABS |
| Body Platform | M4 |
| Inner Barrel Length | 200 mm |
| Length | 697 mm |
Product Description
Overview
As the world modernizes, spaces are becoming increasingly crowded. Thus, the instances where the M4 was the shortened version of the M16 have evolved to where the M4 is once again too long, leading to the creation of the M4 CQB (Close Quarter Battle) with an even smaller size using lighter alloys to allow for better maneuverability in tight spaces.
Exterior of the Replica
The airsoft replica is equipped with a RIS front made of aluminum, allowing for the attachment of a wide variety of accessories. It is constructed entirely from high-quality aluminum, thus reducing the overall weight of the airsoft replica. The paint used is specially designed to be wear-resistant. The stock is retractable with 6 adjustable positions made from ABS plastic.
The components of the airsoft replica are manufactured with great care, ensuring that their assembly is very precise, eliminating any play between them. The thread of the flash hider is standard. The dust cover flap is designed to remain open to provide an extra touch of authenticity. The sighting system consists of 2 foldable metal sights.
The airsoft replica is equipped with 4 QD type mounts, all ambidextrous, and a QD ring is included in the package.
Interior of the Replica
The gearbox of the airsoft replica is version 2, equipped with 8 mm steel bearings of high quality. The interior of the gearbox is very carefully processed; the gears are made from a hard metal that is wear-resistant, and the shimming is very well done. The cylinder head is made of aluminum, as is the nozzle, which is also equipped with a sealing o-ring. The cylinder is specifically ported for G&P, meaning it is bored out towards the opposite end of the exhaust. The BBs are propelled at a speed of approximately 100-105 m/s measured with 0.20g BBs.
The motor is a high-speed model G&P M120 which, together with a 7.4V 1200mAh battery, can shoot up to 20 BBs per second.
The hop-up chamber is metal, and the inner barrel has a diameter of 6.08 mm. The accuracy of the airsoft replica is good, and the hop-up effect is consistent.
Power Supply
The airsoft replica is equipped with a large Deans connector, and it supports 7.4V LiPo or 8.4V and 9.6V NiMh batteries. It is recommended to use a LiPo battery with a voltage of 7.4V 1000-1200 mAh stick type to allow for its installation inside the buffer tube. It is not recommended to use a battery larger than 9.6V as it may damage the airsoft replica.
Reviews (1)
Continuă cu Google