Frequently Asked Questions
G&P Sentry Magpul
Product code: A6443
M4 CQB manufactured by G&P, accessorized with Magpul, designed for Close Quarters battles. The reduced dimensions and lightweight construction using aluminum significantly enhance maneuverability. The included accessories provide an additional level of precision for the user. The front RIS allows for the attachment of a wide variety of accessories.
The use of a High-Speed motor enables the emptying of a mid-cap magazine of 120bb in less than 6 seconds. The resulting hail of BBs, when used correctly, can take out many opponents on the opposing team.
Equipment Specifications
| Gearbox Version | Version 2 |
| Firing Mode | Semi/Auto |
| Hop Up | Adjustable |
| Battery Connector | Large Deans |
| Speed | 110 - 115 m/s |
| Recommended Battery | 7.4 V Li-Po 1200mAh |
| Inner Barrel Diameter | 6.08 mm |
| Material | Aluminum, Steel, Metal, Polycarbonate, Aluminum, ABS |
| Body Platform | M4 |
| Inner Barrel Length | 290 mm |
| Length | 682 - 764 mm |
Product Description
Overview
As the world modernizes, spaces are becoming increasingly crowded. Thus, the instances where the M4 was the shortened version of the M16 have evolved to a point where the M4 is now too long again, leading to the creation of the M4 CQB with an even smaller size using lighter alloys to allow for better maneuverability in tight spaces.
Exterior of the Replica
The airsoft replica is equipped with a RIS front made of aluminum, allowing for the attachment of a wide variety of accessories. It is entirely constructed from high-quality aluminum, thus lightening the overall weight of the airsoft replica. The lower receiver is manufactured by Magpul, featuring a unique design that contributes to the integrity and maneuverability of the airsoft replica. The paint used is a special wear-resistant type. The stock is retractable with 6 adjustment positions made from ABS plastic.
The components of the replica are manufactured with great care, ensuring that their assembly is very precise, eliminating any play between them. The flash hider's thread is standard. The dust cover is designed to remain open to provide an extra touch of authenticity. The sighting system consists of 2 metal flip-up sights.
For a firmer grip, the manufacturer has included a Stubby vertical grip made from ABS, which can be attached to the rail with a quick-release system. The package also includes 3 ladder-style rail covers that can be mounted on the rail to provide increased protection for the hands or the rail against possible accidents.
The airsoft replica is equipped with 2 QD mounts, one located on the stock and the other above the grip, both ambidextrous, and a QD sling ring is included in the package.
Interior of the Replica
The gearbox of the airsoft replica is version 2, equipped with 8 mm steel bearings of high quality. The interior of the gearbox is meticulously processed; the gears are made from a hard, wear-resistant metal, and the shimming is very well executed. The cylinder head is made of aluminum, as is the nozzle, which is also equipped with a sealing o-ring. The cylinder is specifically ported for G&P, meaning it is bored out towards the opposite end of the discharge. The BBs are propelled at a speed of approximately 110-115 m/s measured with 0.20g BBs.
The motor is a high-speed model G&P M120, which, together with a 9.6V 2000 mAh battery, can fire up to 21-22 BBs per second.
The hop-up chamber is metal, and the inner barrel has a diameter of 6.08 mm. The accuracy of the airsoft replica is good, and the hop-up effect is consistent.
Power Supply
The airsoft replica is equipped with a large Deans connector, supporting 7.4V LiPo or 8.4V and 9.6V NiMh batteries. It is recommended to use a LiPo battery with a voltage of 7.4V and a capacity of 1000-1200 mAh stick type, to allow for its installation inside the buffer tube. It is not recommended to use a battery larger than 9.6V as it may damage the airsoft replica.
Reviews (1)
Continuă cu Google