Frequently Asked Questions
G&P M4 Sentry Desert
Product code: A6399
M4 CQB manufactured by G&P designed for Close Quarters battles. The compact dimensions and lightweight construction using aluminum greatly enhance maneuverability. The included accessories provide an additional level of accuracy for the user. The front RIS allows for the attachment of a wide variety of accessories.
The use of a High-Speed motor enables the emptying of a mid-cap magazine of 120bb in less than 6 seconds. The resulting hail of BBs, when used correctly, can take out many opponents on the opposing team.
Equipment Specifications
| Gearbox Version | Version 2 |
| Firing Mode | Semi/Auto |
| Hop Up | Adjustable |
| Battery Connector | Large Deans |
| Speed | 110 - 115 m/s |
| Recommended Battery | 7.4 V Li-Po 1200mAh |
| Inner Barrel Diameter | 6.08 mm |
| Material | Aluminum, Steel, Metal, Polycarbonate, Aluminum, ABS |
| Body Platform | M4 |
| Inner Barrel Length | 290 mm |
| Length | 682 - 764 mm |
Product Description
Presentation
As the world modernizes, spaces are becoming increasingly crowded. Thus, the instances where the M4 was the shortened version of the M16 have evolved to a point where the M4 is once again too long, leading to the creation of the M4 CQB with even smaller dimensions using lighter alloys to allow for better maneuverability in tight spaces.
Exterior of the replica
The airsoft replica is equipped with a RIS front made of aluminum that allows for the attachment of a wide variety of accessories. It is constructed entirely from quality aluminum, thus reducing the overall weight of the airsoft replica. The paint used is a special wear-resistant type. The stock is retractable with 6 adjustable positions made from ABS plastic.
The components of the airsoft replica are manufactured with great care, ensuring that their assembly is very precise, eliminating any play between them. The Flash-hider thread is standard. The dust cover flap is designed to remain open to provide an extra touch of authenticity. The sighting system consists of 2 metal flip-up sights.
For a firmer grip, the manufacturer has included a Stubby vertical grip made from ABS with the possibility of attachment to the rail using a quick system. The package also includes 3 ladder-type ornaments that can be mounted on the rail to provide increased protection for the hands or the rail against possible accidents.
The airsoft replica is equipped with 2 QD mounts, one located on the stock and the other above the grip, both ambidextrous, and a QD ring is included in the package.
Interior of the replica
The gearbox of the airsoft replica is version 2 equipped with 8 mm steel bearings of high quality. The interior of the gearbox is very carefully machined; the gears are made from a hard and wear-resistant metal, and the shimming is very well adjusted. The cylinder head is made of aluminum, as is the nozzle, which is also equipped with a sealing o-ring. The cylinder is specifically ported for G&P, meaning it is bored out towards the opposite end of the discharge. The BBs are propelled at a speed of approximately 110-115 m/s measured with 0.20g BBs.
The motor is a high-speed model G&P M120 which, together with a 9.6V and 2000 mAh battery, can fire up to 21-22 BBs per second.
The hop-up chamber is metal, and the inner barrel has a diameter of 6.08 mm. The accuracy of the airsoft replica is good, and the hop-up effect is consistent.
Power Supply
The airsoft replica is equipped with a large Deans connector, and it supports 7.4V LiPo or 8.4V and 9.6V NiMh batteries. It is not recommended to use a battery larger than 9.6V as it may damage the airsoft replica.
Reviews (2)
Continuă cu Google