Frequently Asked Questions
G&P brand LiPo battery. It has a compact shape consisting of 3 cells, resulting in 11.1V. The battery capacity is 1200mAh. The discharge rate of the battery is approximately 30C, providing the replica with more than sufficient current.
Equipment Specifications
| Battery Connector | Large Deans |
| Magazine Capacity | 1200 mAh |
| Voltage | 11.1 V |
| Battery Shape | Compact |
| Discharge | 30 C |
| Battery Type | Li-Po |
| Width | 18 mm |
| Height | 15 mm |
| Length | 135 mm |
Product Description
Battery manufactured by G&P . It consists of 3 individual cells combined into a compact assembly with a small form factor, allowing its use with replicas that have limited battery space. The battery discharge rate is 30C. The build quality is very good, as is its reliability over time.
This battery is equipped with a Deans connector.
WARNING:
- Lithium Polymer (LiPo) batteries can be extremely dangerous.
- The user must take all precautions for: potential fire, bodily harm, and damage to property.
- If improperly used, damaged, or defective, LiPo batteries can cause explosions, fire, smoke, and poisoning risks.
- By purchasing this type of battery, the user assumes responsibility for any risks associated with LiPo batteries.
- LiPo batteries are not toys and should not be left within reach of children as they can pose a real health hazard.
- LiPo batteries should not be thrown into fire, placed in an oven, or microwave as they can explode.
- LiPo batteries contain/may emit electrolytes, toxic vapors, and other harmful chemicals. Handle these batteries carefully and avoid any contact with skin, eyes, or other body parts. In case of contact, rinse thoroughly with water and contact a doctor immediately.
- Do not attempt to charge mechanically or chemically damaged batteries.
Actions Leading to Battery Damage
- Charging LiPo batteries with a charger that lacks balancing and automatic shutoff features.
- Connecting in series or parallel with another cell or battery even if they appear similar.
- Exceeding maximum and minimum operating voltages.
- A temperature drop or rise outside the permitted limits.
- Excessive charging current.
- Short-circuiting the battery terminals.
- Subjecting the battery to mechanical shocks such as dropping, hitting, bending, cutting, twisting, deforming, or puncturing.
- Contact with liquids.
- Improvising an improper charging setup.
- Using inappropriate, improvised charging cables.
General Information
- LiPo batteries consist of cells.
- The parameters of this type of battery are: Voltage measured in Volts (V), Capacity measured in milliamp hours (mAh), and instantaneous discharge (C)
- Each LiPo battery has a power connector and a charging connector.
- The power connector is used to power the device intended for power supply.
- The charging connector is exclusively for charging the battery. (in some cases, charging is done through both the power and charging connectors)
- The battery is charged using the charging connector, and in some advanced chargers, connecting the power connector is also necessary.
- LiPo batteries are charged with special chargers designed for LiPo batteries that have cell voltage balancing and automatic shutoff features.
- Each LiPo battery has a maximum charging rate of 1.05X its capacity, which must not be exceeded during charging.
- Each cell has a maximum voltage of 4.2V and a minimum voltage of 2.7V.
- During operation or charging, the battery temperature must not drop below 0°C or rise above 50°C.
- For long-term storage of the battery, the capacity should be between 15% and 25% of the maximum value.
Airsoft6 cannot guarantee that you have used correct operating methods and have adhered to the charging, discharging, or storage conditions of LiPo batteries. For this reason, we reserve the right to refuse the replacement, as a warranty, of improperly used batteries (which violate the above instructions and warnings) and are not responsible for material, moral damages, or loss of life.