Cyma CM.701B

Presentation

This replica is offered by Cyma and is the CM.701B model. It belongs to the category of replicas that operate on a manual loading basis. Thus, for each shot, the replica must be reloaded. This system has an extremely low operating cost but will require slightly better physical condition.

Exterior of the replica

The body of the replica is made of ABS plastic, while the receiver and barrel are made of metal. At the back, the butt plate is covered with a rubber layer for a good shoulder fit. The sling attachment points are located at the front end of the body and at the back of the stock. The magazine compartment is at the front of the trigger and is operated by pressing the round button.

Interior of the replica

The gearbox is made of metal, and the hop-up chamber is also. The piston and guide are made of polycarbonate, while the cylinder is made of aluminum. The inner barrel has a diameter of 6.08mm, and the hop-up chamber allows for adjustment of the hop-up adjustment from the exterior of the replica. The small lever is located on the left side of the external barrel. The replica fires BBs at a velocity of 125-130 m/s measured with 0.20g BBs.

Power Supply

The replica is delivered partially assembled, but the assembly is simple and easy. We recommend using high-quality BBs for optimal performance. Use quality consumables for optimal performance and do not reuse BBs.