Frequently Asked Questions
Umarex COP SK CO2
Product code: A0114
Airsoft pistol operating on CO2 model COP SK manufactured by Umarex. This pistol is non-blowback (NBB) and not recommended for airsoft games. The efficiency of the CO2 is very good. One CO2 cartridge can fire up to 50 BBs.
Equipment Specifications
| Recoil | Fara recul |
| Gas Type | CO2 12g |
| Material | Metal, ABS, ABS |
| Speed | 135 - 140 m/s |
| Hop Up | Fixed |
| Firing Mode | Semi |
| Propulsion | CO2 |
| Magazine Capacity | 15 BBs |
Product Description
Short History
The Ruger P series manufactured by Sturm, Ruger & Company is a line of semi-automatic pistols produced from 1985 to 2013, replaced by the SR series. The P series pistols were designed for military forces, law enforcement, and civilians. The models are largely based on the operation mechanism of the M1911 pistol designed by Browning.
Description
The presented airsoft replica closely resembles the original pistol in external appearance. The major difference is the non-blowback (NBB) operation. This principle is simple. Upon pulling the trigger, a BB from the magazine is fed into the barrel while the hammer is cocked and released. Thus, the trigger pull is somewhat longer than in recoil pistols, and the pressure required to pull it is greater.
Exterior of the Replica
The upper part of the replica (the slide) and the lower part are made of quality ABS plastic. Its relatively light and well-distributed weight contributes to maneuverability. The Mag catch button is positioned according to the real pistol, while the safety button is located on the right above the trigger. The other buttons are strictly decorative. At the front, there is a standard 22mm rail on which a variety of accessories such as lasers, flashlights, or other devices can be mounted. The sights of the airsoft replica are fixed but aligned straight, allowing for aiming.
Interior of the Replica
The operating mechanism is extremely simple and practical, ensuring high reliability. Quality metal components are used, making it resistant to wear. The airsoft replica does not feature a BB lift system, Hop-Up, but due to the relatively high speed of 135-140 m/s with 0.20g BBs, the BB has a straight trajectory over a sufficiently long distance.
Power Supply
The replica operates with 12g CO2 cartridges stored inside the grip. The magazine of the replica is operated separately from the CO2 compartment. We recommend using high-quality BBs and not reusing them. Otherwise, the replica may malfunction.
Warning: It is recommended to spray a small amount of silicone oil on the contact seal surface before installing a new CO2 cartridge. It is not recommended to store the CO2 cartridge in the airsoft replica; after each use, even if the cartridge is not empty, it should be removed to protect the seals.
Reviews (9)
Continuă cu Google