Specna Arms Shortie-82 station

Description

Transceiver Specna Arms Shortie-82. For those less familiar with communications, this transceiver has the following specifications:

• The working frequencies are between 400MHz and 520MHz, which means it can be configured to communicate with classic PMR 446 stations.
• The transmission power of the transceiver is quite high, 5W, allowing signal transmission over relatively long distances.
• Transmission frequency can differ from reception frequency. Dual band.
• Possibility to intercept FM radio frequencies.
• Voice menu and settings guide.
• 10 transmission termination tones.
• The battery is a 2800mAh Li-ion type, providing a large autonomy.
• Sound clarity is good both in reception and transmission.
• The transceiver programming is simple and intuitive.
• Up to 128 communication channels can be programmed.
• The transceiver has a channel scan function for preset channels or frequencies.
• The transceiver can be used in 2 modes. One mode where the frequency is manually set and another mode where frequencies are stored and noted as communication channels.
• The keypad can be locked to prevent unintentional menu access.

And for those knowledgeable in the field of communications, here are the specifications:

• 2-line display
• Tracking of 2 channels
• DTMF/2 tone/MSK encode ANI
• Emergency transmission ANI
• Programmable side key
• 128 positions for preset channels
• VOX level from 1 to 9
• Adjustable transmission power High 5W/Low 1W
• Programmable via PC
• Squelch level 0 - 9
• Possibility to reverse transmission-reception frequencies
• Frequency adjustment steps: 25k, 12.5k, 6.25k, 10k, 5k
• Scrambler
• 50 CTCSS and 104 DCS
• DTMF function on/off

The transceiver package includes the Baofeng UV-82 VHF/UHF transceiver, 2800mAh Li-ion battery, Dualband antenna, Charger (adapter + charging base), Voltage adapter, Headset with microphone (dual PTT), Short cord, Belt clip, and instruction manual in English.